• Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
  • Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
  • Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
  • Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
  • Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
  • Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring

Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring

Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate, High Temperature
Type: Insulation Sleeve
Chemistry: Inorganic Insulation
Material: Ceramic
Thermal Rating: Customized
Maximum Voltage: >100KV
Samples:
US$ 10/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation

Basic Info.

Model NO.
Silicon Nitride
Classification
Inorganic Insulation Material
Certification
Sgj
Color
White
Brand
Sgj
Transport Package
Individual Packing
Specification
Non-Standard
Trademark
SGJ
Origin
China
HS Code
6914100000
Production Capacity
1000000sets/Year

Product Description

Industrial Ceramics
SGJ Customized High temperature Machining Ceramic Parts Silicon Nitride Si3N4 Insulating
Dynamic and Static Ring

Si3N4 ceramic
Silicon nitride is a kind of superhard material, which has lubricity, wear resistance, corrosion resistance and oxidation resistance at high temperature. It also resists cold and hot shocks and is heated to 1 in the air ºC more than 1,000, rapid cooling and then rapid heating will not break apart, it is often used to make mechanical components such as bearings, turbine blades, mechanical seal rings, molds, etc. Silicon nitride ceramic has excellent mechanical, performance and processability, high temperature resistant ceramics, corrosion resistant ceramics, wear resistant ceramics, absolute magnetic ceramics, insulating ceramics and self-lubricating ceramics, etc. silicon nitride ceramic shaft sleeve is widely used in magnetic drive pump, chemical pump, mortar pump, mud pump, piston pump and so on. It has the advantages of excellent corrosion resistance, high coefficient of heatconductivity, self-lubricity, small expansion and so on. It can be widely used in the petroleum, chemical, machinery building, metallurgical industry and motors industries. The frictional factor of combinationof silicon carbide and carbongraphite is the least.

Features
1.The wear-resistant parts of the pulverizer.
2.Ceramic bearings, heat exchangers.
3.Chemical pump parts, various nozzles.
4.High temperature cutting tools, fire resistant plates.
5.Mechanical wear-resistant parts.
6.Steel return raw material, arrester.
7.Spare parts for other semiconductor manufacturing.

Performance Index OSi3N4 Ceramics

Type

Condition

Performance

Main Components

Normal Temperature

Si3N4≥95%

Bulk Density-g/cm3

Normal Temperature

3.22

Elastic Modulus-Gpa

Normal Temperature

350

Vickers Hardness-HV

Normal Temperature

1870

Bending Strength-Mpa

Normal Temperature

780

Fracture Toughness-MPa·m1/2

Normal Temperature

7.2

Thermal Expansion Coefficient-10-6/K

20-1000ºC

3.2

Thermal Conductivity-W/

20-1000ºC

25


Follow Products R&D by SGJ-International (Shaanxi Sgj International Co., Ltd.)
Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring
Glazed Alumina Ceramics

Glazed Alumina Ceramics is a kind of material based on alumina, which is used in thick film integrated circuits. Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. Alumina ceramics are widely used. Because of its superior performance, it has been widely used in modern society to meet the needs of daily use and special performance.
Alumina electrical ceramics have low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength and good cold and hot shock resistance. It is widely used in temperature controller, insulation parts, thermal equipment, electric heating equipment, iron structure building, shipbuilding and so on.


Alumina Manufacturing Description:
Alumina Ceramics can be produced in a wide range of purities with additives designed to enhance its properties. Typical purities range from 85 to 99.7% although Precision Ceramics generally work over 99.7% material.

It can be injection molded, die pressed, isostatically pressed, slip cast and extruded. Once fired and sintered, it can only be machined using diamondgrinding methods but prior to sintering advanced green and biscuit machining techniques developed by Precision Ceramics allow more complex components to be manufactured using traditional machining methods. In addition Alumina can be readily joined to metals or other ceramics using metallising and brazing techniques.

Alumina can be machined in green, biscuit, or fully dense states. While in the green or biscuit form it can be machined relatively easily into complex geometries. However, the sintering process that is required to fully densify the material causes the alumiuna body to shrink approximately 20%. This shrinkage means that it is impossible to hold very tight tolerances when machining alumina pre-sintering. In order to achieve very tight tolerances, fully sintered material must be machined/ground with diamond tools. In this process a very precise diamond coated tool/wheel is used to abrade away the material until the desired form is created. Due to the inherit toughness and hardness of the material, this can be a time consuming and costly process.

Precision Ceramics specialises in tight tolerance, highly complex work and has extensive in-house machining facilities - including 4th & 5th axis machining centres, drilling, grinding, milling, polishing, sawing, tapping, threading and turning - to enable us to manufacture Alumina components to the highest specifications.

Precision Ceramics is your Alumina machining specialist for your technical ceramic prototyping & manufacturing needs; we are always happy to use our many years of advanced ceramics experience to provide advice on materials, design, and application. If you would like to buy Alumina plates, rods, tubes or custom machined components, please contact SGJ for more details.


Alumina Electrical Ceramics
Alumina electrical ceramics have low dielectric constant, low dielectric loss, high insulation strength, high volume resistivity, good bending strength, high stability, high compressive strength and good cold and hot shock resistance. It is widely used in temperature controller, insulation parts, thermal equipment, electric heating equipment, iron structure building, shipbuilding and so on. Alumina is the most cost effective and widely used material in the family of engineering ceramics. Extremely High Purity, Temperature & Strength; Excellent Corrosion, High Strength, Wear Resistant, Electronic Insulating, Structural & Metalizing, Porous, Easily Degassed & Machinable. The raw materials from which this high-performance technical grade ceramic is made are readily available and reasonably priced, resulting in good value for the cost in fabricated alumina shapes.
Glazed Alumina Ceramics is a kind of material based on alumina, which is used in thick film integrated circuits. Alumina ceramics have good conductivity, mechanical strength and high temperature resistance. Alumina ceramics are widely used. Because of its superior performance, it has been widely used in modern society to meet the needs of daily use and special performance.


SGJ Alumina Ceramic Features:
• Excellent electrical insulation properties
• High compressive and dielectric strength
• High hardness and mechanical strength
• High thermal conductivity and thermal shock resistance
• Low density
• Resistant to strong acid and alkali attack at high temperatures
• Transparent to microwave radio frequencies
• Very specific thermal conductive and thermal expansion rates
• Wear and abrasion resistant


SGJ 96% alumina is an easily metallisable ceramic composition:

This material SGJ 96% alumina material is an excellent electrical insulator that can be metallised to facilitate high-temperature brazing of assemblies. This material features:

  • Very high volume resistivity
  • Low loss, constant high dielectric
  • High density, non-porous and vacuum tight
  • Resists abrasive wear and chemical attack

The fact that this material can be metallised makes this a good choice for many ceramic to metal or brazed assemblies such as high-vacuum systems, laser equipment (gas, solid-state and waveguide), X-ray tubes and electron microscopes, microwave windows and insulators in medical and scientific equipment.
Follow Products R&D by SGJ-International (Shaanxi Sgj International Co., Ltd.)
Sgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static RingSgj Customized High Temperature Machining Ceramic Parts Silicon Nitride Si3n4 Insulating Dynamic and Static Ring

 

Send your message to this supplier

*From:
*To:
avatar Mr. Guo
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2021

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation
International Commercial Terms(Incoterms)
FOB, CFR, CIF, DAT, FAS, DDP, DAP, CIP, CPT, FCA, EXW, Others
OEM/ODM Availability
Yes